Install WireGuard on AsusWrt

OVPN allocates shared (NAT) IP addresses to connected clients. You will need our Public IPv4 add-on in case you access your server remotely.

1. Log in to your router

Connect your computer to your ASUS router using either Wi-Fi or Ethernet cable.

Open a web browser and navigate to the router's browser interface at http://router.asus.com. If you're unable to find that page, you can also use http://192.168.1.1

Enter your Asus router username and password and click on Sign in

2. Generate the config(s) you want

You need to be logged in to download the configuration files. Once you're logged in, you will find the files here.

Total infrastructure ownership

All the hardware used to operate OVPN is owned by us. All VPN servers operate without hard drives as the operating system only resides in RAM.

Learn more

3. Configure the router

In the Asus router web GUI, navigate to VPN -> VPN Fusion

Click on Add profile

In the Connection Name field, enter the name you want to give the connection

Under VPN type, select WireGuard

Click on Upload config and select the configuration file you downloaded in 2. Generate the config(s) you want

Activate Enable NAT

Click on Apply all settings

4. Connect to OVPN

To connect to OVPN, find the profile you created under SERVER LIST and click the toggle to the right of it. The test will say CONNECTED if a successful connection has been established.

5. Finished

You should now be connected to OVPN and be able to browse the internet safely. To make sure everything was set up correctly, please check the dashboard to verify that you are connected.

Account